Client Connect is the system topology that enables Access/One Network to support and provide access to client devices using any wireless technology. Consisting of a series of Access/One Network modules supporting 802.11a, 802.11b, 802.11g or Bluetooth, the Client Connect choice enables you to customize each Network Node to support the wireless technologies you need in the enterprise locations you need them.

Whether users carry a notebook, PDA, barcode reader, or other WLAN or Bluetooth device, they are able to stay continually connected to the network as they move about the building. No special software is needed on the device. No special configuration is needed to remain connected.

Access/One Network was designed to be modular and flexible, and each Network Node is capable of supporting one, two or three Client Connect modules of any type and mix, providing you with the configuration options to meet all your user connectivity needs. The Client Connect category of Access/One Network enables you to provide secure network access for any type and mix of wireless users within your network infrastructure. This enables support for diverse wireless user requirements at all levels of the organization (corporate, divisional, departmental and group level).

• Network Architecture Type: Infrastructure, mesh, auto-discovery, self-healing 

• Network Connect: Auto sensing 802.3 10/100 Ethernet via the Base, Module or IEEE 802.11a /g/n 

• Remote Configuration Support: BOOTP, DHCP, Telnet, HTTP, FTP, TFTP and SNMP

• SNMP Compliance: MIB I, MIB II, 802.11 MIB, Strix MIB

• Integrated Power over Ethernet Support: 802.3af and Cisco proprietary (Base Module); 13 Watts maximum

• Input Power Requirements: Base Module - 90 to 265 VAC  47 to 63 KHz (power supply); 18 Watts maximum

• Dimensions: - 802.11 Wireless Module:  5.0 x 3.65 x 0.60 in - Antenna Module: 5.0 x 3.65 x 1.25 in. - Base Module:  5.0 x 3.65 x 1.30 in.

• Environmental: 32° to 104° F (0° to 40° C)10 to 90% humidity (noncondensing)

• Status LEDs: Single multi-state LED: green, orange, red

• Mesh Topology is the next evolutionary step in networking moving beyond wireless LAN switches and access points.
• Self-configuring, self-healing, self-tuning for automatic operations.
• Drops seamlessly into Cisco and Microsoft environments.

•  Manager/One web interface provides a full suite of intuitive management tools at the network, node and radio levels.
• Supports all industry standard security protocols.
• Virtual/Strix and Priority/One supports deployments of mixed use networks where varying security schemes are implemented based on user type.

•  Not dependent on a central control point and scales much more effectively then typical solutions.
• Provides a reliable redundant systems, extendable over thousands of square feet.
• Modular design makes Access/One Network IWS highly scalable,

•  Installs in hours, not weeks
• Achieves reliable communications without complicated planning and site mapping.
• Weak or dead zones are easily corrected by simply moving a network node or dropping another node into place.

• WISP ,Carriers, Telcos and Cable Operators
• Military and Disaster Management
• Police, fire, and emergency medical services
• Video Surveillance ,Mobility Solutions, Critical Infrastructure
• Integrated Highway Management, High Speed Rail Network
• Industries, mining, construction sites, Ports etc
• Shopping malls and hot-spots (Coffee shops, book stores etc).
• Hotels, conference and convention centers and resorts .
• Automatic Meter Reading,SCADA
• Hospitals ,Universities and college campuses